Category Archives: Chaos

Chaos Sorceror painted

So, I’ve painted the Sorceror now as well.  Here’s the paints used for the NMM bronze on the staff:

Base – Mourn fang brown base


Layer one – 2:1 Mournfang brown : White scar

Layer two – 1:1 Mournfang brown: White scar

Layer three – 1:2 mournfang brown:White scar


Layed one – Dryad bark

Layer two – 2:1 dryad bark : abandon black

Layer three – 1:1 dryad bark : abbadon black

Then highlighted with White scar (inc reflections), washed with Seraphim sepia all over, and then the main highlights picked out again in White scar.  I’m quite happy with the results, which can be compared with the skull done in metallic paints – the icon and tip are NMM:

Sorceror Staff NMM

Sorceror Rear Sorceror Profile Sorceror Front


Cypher Conversion from Dark Vengeance Librarian

So, next on the list for conversion is the Dark Vengeance Librarian.  I thought that with his hood and robes, as well as general posture and outstretched arm, that I would try to turn him into Cypher, the Fallen Angel.  It also provides a good addition to my Chaos force, which is a little lighter on points than the Dark Angels after the two boxes are added (even considering the terminators jumping sides).

So, first off was to grab the librarian, excluding the force sword left arm, and then remove the Librarian shoulder pad and the Psychic Hood.  This ended up a bit tricky later on as a part of the shoulder pad was attached to the body which made it hard to attach the shoulder pad later, but anyway…

Then was the tedious part of removing the Dark Angels and Librarian iconography., which included both shin sections, the horns off the side of the skull in the middle of the belt, the purity seal on the book and the dark angels symbol on the tabard.  I left the books, keys, scrolls and assorted other bits because I thought they didn’t detract from the idea of Cypher – particularly if he was a lore keeper in the fluff.

I didn’t specifically take a photo of that step, but you can see it below.  Next the Librarian’s hand was removed and replaced with a bolt pistol and hand from the Chaos Marine set (little horn removed).  I thought this might add to the age idea, since the CSM items are supposed to be heresy era.  I used a Space Wolves Plasma Pistol – mostly because I thought the icon on top would do for a lion as well as a wolf and the arm pose was reasonable.  A pair of generic marine shoulder pads, one with the rivet patterns was added – the left arm was difficult because the way it connected – I had to take more off the shoulder part on the body that the previous picture showed in order to make it fit better.

The final main part was the Chaos Lord backpack, used because one of the pictures in the dataslate has a skull motif backpack on Cypher, which I liked.  It’s also not too Chaos-y – even with the skull and spine patter there are no tentacles or mutations.  I did snip off the base of the spinal column/tail bone area to level with the base of the backpack.

Here’s a side by side of the original Librarian and Cypher. I then had a quick look at the GW model on the website and realised that I had forgotten the sword, so back to the bitz box where I found the following sword (not sure what from originally):
 I chopped out the hand section and placed on the model.  I picked this sword because I am going to paint it as a scabbard and the shape lent itself to being a scabbard a bit more than many of the others that I looked at.

Here is the final product (being chased by the Ravenwing as it happens):

Obliterater 2 and some more Dark Vengeance Conversions

So, I decided that I needed some green stuff for my land speeder conversion, so in a land of warped logic, I spent the whole day working on an obliterater so that I had two things to work on with the green stuff at the same time.

Only, I got so distracted that I never got to the green stuff, and I never got back to the landspeeder…

So, Obliterater number two started with an Assault on Black Reach (AoBR) terminator as well, but I wanted to change the dimensions a bit more with this one.  Since it was painted, you can see the terminator bitz and the other bitz seperately in the pictures quite easily:

I made an assault cannon-like weapon out of cotton buds:

I split the terminator torso in half.  I intend to keep the back vents showing in the final model, but I want it to look like it outgrew the original armour.  Then I split up the legs instead of just going over them like the last one.  I added a landspeeder typhoon missile launcher to the top.

Then I pinned the main bitz together into an armature of the final shape:

Next I tackled the arm:

Split it up as well.  I want to keep the hand, the connector and if I can, the cable tray as well: Then I got some old audio-visual wire from a spare cord that I didn’t need any more, cut it up and used it to connect the second typhoon launcher to the right arm:

 Then for the gap filler, to which the head and the spikes (bamboo cooking skewers) are pushed into.  I then modelled some muscle shapes onto the body and inserted some paperclip wire that will become tentacles soon:

Because I was on a roll, I then chopped the arms off my second Helbrute and added the Demon Prince bitz that I bought.  I also left off the front plate with the mouth thing and the horns.  At the moment the whole thing is blue-taked together so I can see how it feels.  I’m reasonably happy with it so far:

Eye of Tzeentch Terrain Piece

This one’s been on the desk for far too long.  Originally intended for’s Group Build 66 – “Something Blue”, it finally got finished alongside the Dead of Winter piece for Group Build 70 when I needed the same modelling supplies from the hardware store that delayed this project.

Only five months late….


Campaign for Zavijah – Prologue: Angels of Wrath vs Chaos (1000pts)

So, to start off the new year and the gift of a gaming table (and garage space so that games can stay set up), my interest in gaming has renewed dramatically. The kids are also remaining interested, as long as they get breaks at the end of each turn to go and play outside or on the computer.

The plan then is to work through a Planetary Empires Campaign (some minor rule adjustments may arise) representing the Campaign for the Zavijah system.

There are some vagaries of the game because of the inclusion of Mr 8 and Miss 6.  For instance, they wouldn’t have the board set any way other than the big hill right in the middle and the generals swapped sides so many times I lost count.  My son started with Chaos and my daughter marines – by the end they had both played each side and were together as Chaos with me in charge of the marines.


A local insurgency against the governor of Zavijah was growing out of control and help was sent for from the Imperium.  Local Chaos cults mere spreading, but rumours of power armoured warriors joining the fray led to the emergency call.

The Imperium took years to answer, but the Eldar from the craftworld of Nido’fal offered their support, which the governor agreed to.  After two years of fighting, the 3rd Company of the Blood Guard arrived to assist (while the strike fleet passed through to deal with a Tyranid incursion).  The Blood Guard were unimpressed to find the local population allied with the Eldar, but pragmatism and the confirmed prescence of the True Order (suspect renegade chapter:origin unknown) led them to ignore the situation for the meantime with the intent on dealing with the alien infestation later.  The Blood Guard set their own campaign areas away from the Eldar for the time being.

Something in the stories captured the interest of the Angels of Wrath, who dispatched a strike cruiser with a Ravenwing and Deathwing detachments under the command of their Master of the Ravenwing, Asam.  The Angels of Wrath are hostile to all parties.

At the same time, the outlying elements of Splinter Fleet Scylla have been making attempts to land in the system.  The have had minimal success so far, but there is a minor infestation on the planet that has been helped by a local genestealer hive.


The Angels of Wrath are attempting to establish a forward base on the planet, with the intent of interrogating the locals about the Chaos warriors.  A small force under Company Master Zhaak attempts to draw out the Chaos forces to allow the beachhead to be established.

Master Zhaak walked slowly and patiently to the Inner Sanctum of Wrath’s Crusade.  The corridors here were sparse compared to the finery that adorned the Bridge and the Imperial Navy command areas.  The further into the Inner Sanctum the plainer things became – Zhaak idly mused once again about how much further in the Inner Circle there was to progress – after the century of service he occupied some of his meditation time with estimating how many more of the hidden ranks there were in front of him by observing the rate of removal of luxuries from the areas that he had gained access to already.

Grand Master Asam was in one of the outer rooms of the Sanctum, along with Interrogator-Chaplain Evar and Veteran Sergeants Haldith and Trundior.  Asam was a prim, meticulous man, and the dark green robes of the Inner Order that he wore seemed to somehow add to that impression. “Are your men prepared?” he asked without pre-amble.

“I have been to devotions with them all.” Zhaak replied.  “Chaplain Itrandor spoke on the Lies of the Traitors, so they should be in the frame of mind required.”

“Very good.  Proceed with the utmost caution, and never forget the Primary Target.”

Campaign – Victor can decide the Angels of Wrath starting tile on main map.

Battle is Purge the Alien, with 1000 points per side.

Initial Deployment has the Angels of Wrath (right) with a tactical squad on each flank, the Ravenwing in the centre and the Deathwing in reserve.  Company Master Zhaak is with the Squad in the foreground, and Lexicanium Raal is with the squad in the background in the crater.    Zhaark received the Furious Charge rule as his warlord trait.  Raal received Life Leech and Haemorrhage from the Biomancy school, though checking the codes later Dark Angels haven’t got Biomancy listed – though I picked it because the DV pack gives the librarian the primaris power from that school – odd.

The True order threw a rough line together with the four cultist squads dispersed relatively evenly.  Lord Petturi and the Chosen are in the foreground, Petturi recieved the Lord of Terror trait.  The Helbrute and the Obliterators are slightly to the far edge of the board.  The Chaos Terminators also chose to stay in reserve to Deep Strike later.

The first turn saw the Angels of Wrath manoeuvre forwards, staying out of main range or using the hill for cover.

Chaos’s contribution to the first turn was to advance across the whole battlefield and to kill two marines from the crater with the Obliterators.

The Angels’ second turn saw five cultists annihilated by a plasma cannon, which broke the weak morale and they fled.  On the other side the plasma cannon took out four chosen, with Lord Petturi saved by his Aura of Dark Glory.  The two Ravenwing combat squads split on opposite sides of the hill, with the squad containing Sergeant Trundior (two grey bikes) charging into the close combat cultists killing five outright before catching the rest with a sweeping advance – First Blood to the Angels before a quick regroup,

Chaos responded by aiming the heavy fire power of the Helbrute and Obliterators at the second Ravenwing Combat Squad, wiping them off the board.  The fleeing cultists took heart from this and regrouped.

End of Second Turn – Victory Points Score – Angels 3, Chaos 1.

On the third turn, the Ravenwing squad turbo-boosted across the board, ending up right in front of the helbrute and obliterators.  The plasma cannon shots missed everything.

Chaos responded by shooting everything at the Ravenwing squad, but the Jink and Ravenwing re-roll saved them all.

On the fourth turn the Deathwing teleported to the Ravenwing homer, unleashing a round of autocannon fire that removed two hull points off the Helbrute with glancing hits.  One tactical squad abandoned thier crater and made a run for the centre hill, while the squad in the forest missed with it’s cannon (again).  The Ravenwing wiped out the remains of the cultist squad, earning another Victory Point.

Chaos responded with their own Terminator deep strike behind the crater, killing three marines.  The helbrute and obliterators killed one biker.

The Ravenwing spun around behind the Helbrute, the Plasma gun tearing through the rear armour as the Terminator Autocannon scored another glancing hit.  The Ravenwing continued on to assualt the next cultist squad, winning the combat but failing to make a sweeping advance.  The tactical squad made it to the hill.

Chaos responded by melting two Terminators with Obliterator lascannons, while the fleeing cultists regrouped and the Chosen, Lord and remaining cultists advanced over the next hill.

The game ended at the end of the fifth turn.


Scores – Chaos, 1 unit destroyed + Linebreaker:  2

Angels, 3 units destroyed + Linebreaker and First Blood: 5.

Interestingly, all the Angels’ points were scored by the one Ravenwing combat squad.

The Angels of Wrath now get their choice of starting tile, having distracted the Chaos forces sufficiently to establish their preferred foothold on the planet.

Veteran-Sergeant Trundior knelt in front of Grand Master Asam as Interrogator-Chaplain Evar recited the Litany of Repentance.  Once completed, he stood to face the Grand Master, who handed him an intricately wrought miniature version of the censors carried by many Angels.  Trundior bowed as he stood.  “Come Brother,” Zhaak told him, “and hear the tale of the the Lion and the Knights of Lupus.”

Evar and Asam watched them leave.  “He has done well” Asam said.

“Perhaps well enough to take your place one day.”

Asam considered that.  “Maybe.  He positively identified the secondary target amid all of his tactical prowess.”

Evar frowned.  “It would be good to see the end of Petturi, but the primary target was not identified.”

“Not observed.”

“No.  Perhaps still hidden.”

Chaos Chosen with Power Axe

Axe Chosen Front Axe Chosen Rear

Chaos Obliterator Conversion Part 3

The next part.  I started with a collection of heavy weapons.  Not all got used in the end.


I cut them up into parts to combine.


Then I made a combination weapon out of some of the parts, using a piece of curved sprue for an upper arm piece.


Greenstuff over the sections to add the ‘muscles’.

IMG_1135I added a face onto the shoulder pad to see if I could get the ‘demon possessed look’ to match the Dark Vengeance Chosen.

IMG_1136Picture of the back of the arm:

IMG_1137Overall, I think I’m happy with the result.

Chaos Obliterator Conversion Part 2

Some more work.

So, I removed the front chest piece from the terminator, and then added gap filler to, oddly enough, fill the gap.  A chaos marine head went onto the gap filler as it set.


Next, some greenstuff to bulk up the legs.  These are also my first attempts at doing muscle shapes, and while a bit poor, I did learn a bit as I was going.  The abs definitely didn’t work quite as I’d hoped, but oh well.


I added a bit on the back of the arm as well.  Again, tried to get the look/feel of a tricep going.  Not sure I got there, but the oblits give me a bit of leeway to learn.


Lastly, I tried a technique I saw on the web the other day for making chain mail.  That used up my leftovers.





Chaos Cultists – Squad 1

Here’s the first squad of cultists.  The close up shots are of five, because that’s how many the Painting Deathmatch ended up being for.  The last is because I couldn’t resist adding the squad.

Not as happy with these guys – The challenge was for 15, so I was painting all 20, and the quality dropped to reflect.




All ten together


Chaos Obliterators Conversion Part 1

Might seem like a bit of a random change to go to Obliterators in the middle of a terminator conversion, but there is madness to my logic!

I’ve never done any significant greenstuff work before, and the next phases of my terminators conversion needs some greenstuff to achieve what I want.  So, therefore I need to learn to do greenstuff.  I’ve been surfing the net, reading and watching tutorials, and I’ve got an idea about what I want to achieve now.  So, I also have some Assault on Black Reach Terminators, and the intent is to make them Obliterators, since the Space Hulk and Dark Vengeance boxes have given me an oversupply of terminator models.  Since the conversion seems to be relatively straightforward, and ‘fleshmetal’ type organic looks seem to be a decent way to learn/practice to greenstuff, it’s over to these guys for a while.  It also gives me space to get things wrong and then bulk up the model with another layer, which my terminators probably wouldn’t accept as easily.

I’ve been keeping some stuff in my bathroom for a while because I like the interesting shapes.  For anyone who hasn’t seen these before, they are inter-dental brushes used as a substitute for floss.  They last a week or so, come in packs of ten in the supermarket.  I’ve been using a couple of different brands, and cleaning off and keeping the used brushes in a corner of the bathroom.  They also come with caps which have a series of different sizes.


The second set of materiels is a cotton bud (again from the bathroom, this time unused) and the terminator arm itself.

IMG_1070First off, I cut off the magazine and stored for later.  Then I cut the end off one of the caps from the interdental brushes and added it below.

IMG_1071Next the cotton bud got cut into four sections, the edges straightened up a bit and them backed in to look like an automatic weapon barrel.  This was then added to the side of the arm.

IMG_1072Next came the greenstuff, into which was also pushed a part of a chainsword that I cut out for the Terminator conversion in an aborted attempted to make a chainfist out of one of the powerfist guys.  Turned out to be almost perfect for this though!  I’ve tried to make the greenstuff look like fleshy, ropy muscle bits on the outside parts, and I decided to keep the shoulder pad intact as well as the feed tube type part from the terminator model.

IMG_1073On the inside, I’ve then had a first attempt at sculpting eyes to match the Dark Vengeance eye theme.  This took a bit of playing around, but thanks to some great you-tube videos around I think I managed something at least passable.  Better yet, I learnt a lot.


Here is the arm back on the body.  The body will get a fair bit of work yet, and a whole scratch built left arm to boot.


IMG_1075There is still a little bit to fix between the weapons/on top of the arm area, some bits to smooth out and some muscles to add.  I decided to wait to let the first bit set before tackling the next phase, since that seems to be most of the advice online – don’t bite off too much in one sitting!

I learnt a lot from this.

1.  Greenstuff goes further than I thought it would.  I mixed what I expected to be a first part only, and then got everything I wanted out of it.

2. Be careful what you hold.  I lost one of the eyes and had to reform after a careless thumb indentation…

3. The general smoothing and making the eye shape was roughly what I expected, which was good!