Author Archives: lupusj
So, I’ve painted the Sorceror now as well. Here’s the paints used for the NMM bronze on the staff:
Base – Mourn fang brown base
Layer one – 2:1 Mournfang brown : White scar
Layer two – 1:1 Mournfang brown: White scar
Layer three – 1:2 mournfang brown:White scar
Layed one – Dryad bark
Layer two – 2:1 dryad bark : abandon black
Layer three – 1:1 dryad bark : abbadon black
Then highlighted with White scar (inc reflections), washed with Seraphim sepia all over, and then the main highlights picked out again in White scar. I’m quite happy with the results, which can be compared with the skull done in metallic paints – the icon and tip are NMM:
So, after a long break, I’m back into the conversion work as well as painting! More Dark Vengeance (DV) goodies!
Chaos Sorcerer – Parts from left to right are: Sorceror head from the Chaos Terminator Lord kit, Plasma pistol and arm from the DV Tactical Sergeant – cut down a bit, the back/cape of the DV Chaos Lord – cut down around the head and around the right arm, the DV Chaos Lord torso, minor adjustments, the DV Lord Arm pistol and hand removed, and the staff from the Chaos Terminator Lord/Sorcerer kit.
Here it is put together (phone photos I’m afraid), along with the Tzeentch Champion backpack from the Chaos Tactical Marines kit. Small amounts of green stuff added to fill the gaps and create a neck.
After a long, long break, with a few bits a pieces done here and there, I got back on the wagon again for a July Deathmatch.
Here is Veteran-Sergeant Haldith of the Deathwing of the Angels of Wrath.
I also tried using some GIMP editing tricks to make a good looking pocture like the ones out of the codexes. Not sure that I achieved the aim.
Well, after a bit of hiatus, April saw two sets of models painted, again for Miniwargaming.com’s monthly Hobby Deathmatch.
This is the last of the tactical marines for the current Dark Angels list, and the first of the main Tyranid horde painting.
So, next on the list for conversion is the Dark Vengeance Librarian. I thought that with his hood and robes, as well as general posture and outstretched arm, that I would try to turn him into Cypher, the Fallen Angel. It also provides a good addition to my Chaos force, which is a little lighter on points than the Dark Angels after the two boxes are added (even considering the terminators jumping sides).
So, first off was to grab the librarian, excluding the force sword left arm, and then remove the Librarian shoulder pad and the Psychic Hood. This ended up a bit tricky later on as a part of the shoulder pad was attached to the body which made it hard to attach the shoulder pad later, but anyway…
Then was the tedious part of removing the Dark Angels and Librarian iconography., which included both shin sections, the horns off the side of the skull in the middle of the belt, the purity seal on the book and the dark angels symbol on the tabard. I left the books, keys, scrolls and assorted other bits because I thought they didn’t detract from the idea of Cypher – particularly if he was a lore keeper in the fluff.
I didn’t specifically take a photo of that step, but you can see it below. Next the Librarian’s hand was removed and replaced with a bolt pistol and hand from the Chaos Marine set (little horn removed). I thought this might add to the age idea, since the CSM items are supposed to be heresy era. I used a Space Wolves Plasma Pistol – mostly because I thought the icon on top would do for a lion as well as a wolf and the arm pose was reasonable. A pair of generic marine shoulder pads, one with the rivet patterns was added – the left arm was difficult because the way it connected – I had to take more off the shoulder part on the body that the previous picture showed in order to make it fit better.
The final main part was the Chaos Lord backpack, used because one of the pictures in the dataslate has a skull motif backpack on Cypher, which I liked. It’s also not too Chaos-y – even with the skull and spine patter there are no tentacles or mutations. I did snip off the base of the spinal column/tail bone area to level with the base of the backpack.
Here’s a side by side of the original Librarian and Cypher. I then had a quick look at the GW model on the website and realised that I had forgotten the sword, so back to the bitz box where I found the following sword (not sure what from originally):
I chopped out the hand section and placed on the model. I picked this sword because I am going to paint it as a scabbard and the shape lent itself to being a scabbard a bit more than many of the others that I looked at.
So, I decided that I needed some green stuff for my land speeder conversion, so in a land of warped logic, I spent the whole day working on an obliterater so that I had two things to work on with the green stuff at the same time.
Only, I got so distracted that I never got to the green stuff, and I never got back to the landspeeder…
So, Obliterater number two started with an Assault on Black Reach (AoBR) terminator as well, but I wanted to change the dimensions a bit more with this one. Since it was painted, you can see the terminator bitz and the other bitz seperately in the pictures quite easily:
I split the terminator torso in half. I intend to keep the back vents showing in the final model, but I want it to look like it outgrew the original armour. Then I split up the legs instead of just going over them like the last one. I added a landspeeder typhoon missile launcher to the top.
Next I tackled the arm:
Split it up as well. I want to keep the hand, the connector and if I can, the cable tray as well: Then I got some old audio-visual wire from a spare cord that I didn’t need any more, cut it up and used it to connect the second typhoon launcher to the right arm:
Then for the gap filler, to which the head and the spikes (bamboo cooking skewers) are pushed into. I then modelled some muscle shapes onto the body and inserted some paperclip wire that will become tentacles soon:
Because I was on a roll, I then chopped the arms off my second Helbrute and added the Demon Prince bitz that I bought. I also left off the front plate with the mouth thing and the horns. At the moment the whole thing is blue-taked together so I can see how it feels. I’m reasonably happy with it so far:
So, my wife decided to take me to CanCon today for some distraction….
I found the stand for Knights of Dice and their range of scenery. All of it was excellent, but what caught my attention was the Tabula Rasa Desert buildings range. They’re a minimalist set of terrain with the intent that they leave the detailing up to you but provide an easy set up and start on the process. They’re laser cut out of MDF and the five buildings in total set me back $84 AUS, which is the cost of about 13 citadel paints (for comparison).
Here’s what’s in the package – the smaller buildings were two or three sheets each ($14 a pop) and the larger compounds were four or five ($20 and $22).
I found them relatively easy to assemble – as far as I can tell there is only one way to make everything fit, so you get no flexibility but no chance of getting it wrong. There were no instructions, which could be an are for improvement – luckily the pictures on the cover did show enough angles to puzzle out which parts went where. It took 13 minutes to punch out and test assemble the first building (Desert Residence 3), which was one of the smaller ones. Another 10 minutes and it was all glued together and done – which included me going around the house several times to find bits that I needed. I suspect that if I had been better prepared would have had it together in 20 minutes.
Access into each of the buildings is quite good. All of the roofs are removable, as are all of the second story areas on the larger buildings.
Overall it took around 1:30 to assemble the five pieces.
I really like the design – there simple, effective and easy. It might be a bit repetitive if I were to scale up and have a duplicate of each building, but there was at least one more building in the range that I didn’t get, so there is a bit more scope for growth.
I’ve added the website to my favourites though. I thought the models did exactly what they should do, and what they claim to.
So, I’ve now put together and magnetised my Ravenwing Attack Bike, using pieces from the Ravenwing Upgrade Spure that I’ve had hanging around for a while. I did adjust the angle on the wing piece at the back to match the Dark Vengeance ones though.
Here’s the biker on his own:
He can change out his pistol for a hand weapon (melta, plasma, flamer), and the side car is magnetised to connect:
Here you can see the side car magnets. Each weapon has one at the back end of the gun, and there is one in the centre of the gunner handle. Opposite angle for the biker:
Here are the magnets in the bases of the multi-melta and the melta-gun. They’re 2mm diameter ones – the bike connectors are 3mm. And ready for battle: